- The units are rigid, glue and dowel construction from 18mm MFC board in various colours. All edges are taped for maximum protection, with the leading edges taped in a 0.8mm PVC to co-ordinate with the unit colour selected.

- Corner base units are supplied with a 500mm blank panel, unlike most units where you select the hinge side on corner base units you select the blank panel side. The blank panel is always 500mm wide. YOU MUST LEAVE A MINIMUM OF 100MM VOID TO THE WALL TO ALLOW FOR DOOR AND DRAWER CLEARANCE AGAINST THE ADJACENT UNITS ( CLICK MORE INFO. LINK FOR CORNER UNIT SPECIFICATION). YOU WILL NEED A MINIMUM OF 40MM FILLER TO ALLOW FOR HANDLE CLEARANCE BETWEEN THE CORNER UNIT AND THE ADJACENT UNIT. WE WOULD RECCOMEND A CORNER POST ON ALL CORNER UNITS WITH A BLANKING PANEL. YOU WILL BE ABLE TO ADD A CORNER POST TO THE ORDER ON EACH CORNER UNIT PRODUCT(SEE BELOW).

- All Corner Base units are supplied with one adjustable shelf but are drilled to provide 3 adjustable shelf positions. (shelf supports are supplied) 110º salice hinges are supplied as standard (factory fitted) Salice soft close hinges are available and can be selected by ticking the soft close tick box which is located on each unit.

- All Corner Base units are supplied as standard with FENNELL MULTISTAR 150mm adjustable legs (factory fitted) with -10mm and +25mm adjustment. The legs are supplied with the plinth clips attached. 

- There is a 42mm service void at the back of all base units.

- All units are listed and priced below as carcase only, by clicking the add doors link you will be given the option to add the neccesary sized doors to the cart in the door style you require. To make the order easier for you to read in the shopping cart we would advise adding the unit to the shopping cart before adding the doors.

- HEIGHT - 720mm +150mm legs x DEPTH - 560MM  x WIDTH - Varies each unit (see below)

- The units are rigid, glue and dowel construction from 18mm MFC board in various colours. All edges are taped for maximum protection, with the leading edges taped in a 0.8mm PVC to co-ordinate with the unit colour selected.

- Corner base units are supplied with a 500mm blank panel, unlike most units where you select the hinge side on corner base units you select the blank panel side. The blank panel is always 500mm wide. YOU MUST LEAVE A MINIMUM OF 100MM VOID TO THE WALL TO ALLOW FOR DOOR AND DRAWER CLEARANCE AGAINST THE ADJACENT UNITS ( CLICK MORE INFO. LINK FOR CORNER UNIT SPECIFICATION). YOU WILL NEED A MINIMUM OF 40MM FILLER TO ALLOW FOR HANDLE CLEARANCE BETWEEN THE CORNER UNIT AND THE ADJACENT UNIT. WE WOULD RECOMMEND A CORNER POST ON ALL CORNER UNITS WITH A BLANKING PANEL. YOU WILL BE ABLE TO ADD A CORNER POST TO THE ORDER ON EACH CORNER UNIT PRODUCT(SEE BELOW).

- All corner drawerline base units are fitted with double skinned metal sided Hettich innotech drawer box/boxes (factory fitted) as atandard. A soft close upgrade is available by selecting the soft close runners option which is located on each unit.

- All Corner Base units are supplied with one adjustable shelf but are drilled to provide 3 adjustable shelf positions. (shelf supports are supplied) 110º salice hinges are supplied as standard (factory fitted) Salice soft close hinges are available and can be selected by ticking the soft close tick box which is located on each unit.

- All Corner Base units are supplied as standard with FENNELL MULTISTAR 150mm adjustable legs (factory fitted) with -10mm and +25mm adjustment. The legs are supplied with the plinth clips attached. 

- There is a 42mm service void at the back of all base units.

- All units are listed and priced below as carcase only, by clicking the add doors link you will be given the option to add the neccesary sized doors to the cart in the door style you require. To make the order easier for you to read in the shopping cart we would advise adding the unit to the shopping cart before adding the doors.

- HEIGHT - 720mm +150mm legs x DEPTH - 560MM  x WIDTH - Varies each unit (see below)

- The units are rigid, glue and dowel construction from 18mm MFC board in various colours. All edges are taped for maximum protection, with the leading edges taped in a 0.8mm PVC to co-ordinate with the unit colour selected.

- Le mans corner base units are fitted with the kessebohmer ( KLM) Le mans pull out mechanism. (cilck here to see video link of the Le mans in action)

- Corner base units are supplied with a 500mm blank panel, unlike most units where you select the hinge side on corner base units you select the blank panel side. The blank panel is always 500mm wide. YOU MUST LEAVE A MINIMUM OF 100MM VOID TO THE WALL TO ALLOW FOR DOOR AND DRAWER CLEARANCE AGAINST THE ADJACENT UNITS ( CLICK MORE INFO. LINK FOR CORNER UNIT SPECIFICATION). YOU WILL NEED A MINIMUM OF 40MM FILLER TO ALLOW FOR HANDLE CLEARANCE BETWEEN THE CORNER UNIT AND THE ADJACENT UNIT. WE WOULD RECOMMEND A CORNER POST ON ALL CORNER UNITS WITH A BLANKING PANEL. YOU WILL BE ABLE TO ADD A CORNER POST TO THE ORDER ON EACH CORNER UNIT PRODUCT(SEE BELOW).

- Le mans Corner Base units are supplied with 110º salice hinges are supplied as standard (factory fitted) Salice soft close hinges are available and can be selected by ticking the soft close tick box which is located on each unit.

- All Corner Base units are supplied as standard with FENNELL MULTISTAR 150mm adjustable legs (factory fitted) with -10mm and +25mm adjustment. The legs are supplied with the plinth clips attached.

- There is a 42mm service void at the back of all base units.

- All units are listed and priced below as carcase only, by clicking the add doors link you will be given the option to add the neccesary sized doors to the cart in the door style you require. To make the order easier for you to read in the shopping cart we would advise adding the unit to the shopping cart before adding the doors.

- HEIGHT - 720mm +150mm legs x DEPTH - 560MM x WIDTH - Varies each unit (see below)